Automotive Tint Film

With Ultra VIsion automotive tint, you get both superior appearance and superior performance. And you also get superior value. Whether you’re looking for stylish good looks, to help protect yourself, your passengers and your vehicle’s interior from harmful UV rays, or to improve the comfort of your ride – we have a solution perfect for any application.

Our films

Light BL

Visible Light Transmittance93% Infrared heat protection80% UV Rejection99% Thickness2.5 mil

Buy now

Light

Visible Light Transmittance93% Infrared heat protection80% UV Rejection99% Thickness2.5 mil

Buy now

Stealth

Visible Light Transmittance90% Infrared heat protection20% UV Rejection99% Thickness2.5 mil

Buy now

Night

Visible Light Transmittance20% Infrared heat protection90% UV Rejection99% Thickness2.5 mil

Buy now

Film installation

UltraVision tint films should be installed in a certified center by an experienced and qualified specialist. To install the film, it is mandatory to use a mounting kit based on the Mounting Concentrate or Film-On concentrate.

Application of the film

UltraVision tinting films are designed for installation on the inner surface of the glass.

Operation of the film

The operation of the glass, with the applied film, is allowed only after the complete drying of the adjusting solution, namely after 72 hours at an ambient temperature above 20 ° C/68 ° F. The operation of the glass, with applied film, at negative ambient temperatures, is allowed only after the complete drying of the adjusting solution, namely after 168 hours, provided that the car is warmed up every day for at least 3 hours. Do not physically affect the film,
until the drying solution dries completely.

The condition for the use of UltraVision tint films after the glue has dried completely:

*ambient temperature from -30 ℃/-22°F to +30 ℃/86°F *relative humidity of air from 50% to 90%, *During the service life of UltraVision films, it is possible to change the technical parameters and shade of the film.

Shelf life of film

Store the film at a temperature of 19-21 ° C/66-70°F and a relative humidity of 35-50%. When storing the film, do not remove the original packaging. Keep the film away from heat sources, the distance to the battery (heating elements) should not be less than 3 feet. When storing, exclude the possibility of direct sunlight on the film. When following these recommendations, the shelf life of the tint films will be 2 years.